Uncategorized

Why a Thermoformed Tray Needs Its Own Barrier Check

Forming redistributes the sheet thickness

As a heated sheet stretches into a tray, the sidewalls and corners can thin more than the flange or base. A barrier layer may thin along with the bulk sheet. The amount varies with the original structure, draw and process. A flat-sheet result describes the material before it took that shape.

A2dad28f8bdd5be5b2b4a795e14b7e66

Packaging sample showroom of SamBound New Material Technology Company Ltd. (sambound.com).

Inspect the regions that stretch

Suppose two trays start with the same multilayer sheet, but one has a deeper pocket. Map wall thickness at the floor, sides and corners, and identify where the barrier layer warrants a closer check. A measurement on an easy-to-reach flange will miss a thin corner. When testing a closed tray, record the lid and seal as well as the formed body.

Use a formed or assembled sample when making a barrier decision about the tray. The sheet result provides a useful incoming material reference.

sambound.com
SamBound New Material Technology Company Ltd.