Uncategorized

DKM PET Preform Machine

Understanding the DKM PET Preform Machine Lineup

For manufacturers evaluating PET bottle preform production, cycle speed, dimensional repeatability, and delivery lead time are the three variables that most directly determine profitability. DKM MACHINERY CO., LTD., operating alongside its sister brand SINO MOULD CO., LTD, has built its PET preform offering around these exact variables, combining dedicated injection molding machines, high-cavity molds, and automation into production lines that are fully commissioned before shipment.

The core equipment in this category is the DKM-PET III Preform-Dedicated Injection Molding Machine, available in four tonnages — DKM-350 PET III, DKM-450 PET III, DKM-550 PET III, and DKM-650 PET III. Each model is matched to a specific cavity count: the 350T unit pairs with 48-cavity lines, the 450T with 72-cavity lines, the 550T with 144-cavity and 168-cavity molds, and the 650T with 144-cavity production lines. This one-to-one matching between tonnage and cavitation is intended to remove guesswork from machine selection for buyers scaling their preform output.

A separate but complementary product, the PET Series Plastic Injection Molding Machine, covers a hydraulic toggle range from 250 to 650 tons and is matched to 48, 72, 96, and 144-cavity preform lines, providing PET-dedicated barrel and injection design for consistent high-cavity production.

What Makes the DKM-PET III Technically Distinct

Three engineering features define the DKM-PET III series. First, a standard electric accumulator combined with synchronized plasticizing and post-mold cooling technology is used to compress molding cycles. Second, nano far-infrared heating rings are applied to reduce production energy consumption. Third, an optimized machine frame structure delivers an injection repeat accuracy of ≤0.5‰, a figure that matters directly to multi-cavity consistency — in high-cavity molds, even small shot-weight variation across cavities translates into rejected preforms or inconsistent bottle wall thickness downstream.

These design choices translate into measurable cycle performance. On a DKM-650 PET III, a 144-cavity preform mold produces an 11g, 29mm neck preform in a 12.8-second cycle. On a DKM-550 PET III, a 168-cavity mold producing an 11g product with a BPF 26/21 neck achieves an 11-second cycle. A 72-cavity standard line paired with the PET 450 machine reaches a 12-second cycle for a 12g, 28mm preform, while a 48-cavity line with the PET 350 machine completes a 16-second cycle for the same 12g, 28mm preform weight class. In a separate demonstration, a 26g preform mold achieved a 12-second cycle time, supported by mold component tolerance held to 0.005mm.

The Full PET Preform Production Line

Rather than selling machines in isolation, DKM Machinery packages the PET Preform Production Line as an integrated solution combining the preform mold, the DKM-PET III injection molding machine, and a take-out robot. Three standard configurations are offered: Standard 1 uses a PET 650 machine with 144 cavities and a take-out robot for an 11g/29mm preform at a 12.8-second cycle; Standard 2 uses a PET 450 machine with 72 cavities and a dual-station external cooling robot for a 12g/28mm preform at a 12-second cycle; Standard 3 uses a PET 350 machine with 48 cavities and a three-station external cooling robot for a 12g/28mm preform at a 16-second cycle.

Automation is handled through the Out-Mold Cooling & Pick Robot, which applies a weight-based cooling strategy: preforms under 16g are cooled directly on the robot gripper during part removal, while preforms over 16g are combined with multi-station cooling units. This approach allows heavier preforms to be cooled sufficiently without extending the mold’s own cycle time, since the cooling load is partially shifted onto the robot stage rather than the cavity.

Mold Supply Through SINO MOULD

The mold side of the equation is supplied by SINO MOULD CO., LTD and its subsidiary SINO-PK, under the product line PET Bottle Preform Mold, covering cavity counts from 8 to 168. Key mold components use Swedish S136 steel (HRC45-48) with a mold base in DIN1.2311, and tolerances are held down to 0.01mm for uniform wall thickness and concentricity, with a precision capability of ±0.005mm for standard neck finishes such as PCO 1810 / PCO 1881 and 28mm necks, typically serving preform weights of 12g-30g. SINO MOULD states over 20 years of multi-cavity preform mold manufacturing expertise and has delivered over 200 sets of standard PET preform molds worldwide. An intelligent standardized production workshop was scheduled to become operational from October 2025, supporting this mold output.

355955692def9b04cbf23bb343c272cf

Delivery Timelines and Commercial Terms

For buyers under time pressure, delivery speed is often as important as technical specification. Standard 48/72-cavity preform lines with standard 28/38mm neck finishes are delivered from order confirmation to qualified shipment in 14 days, while standard 48/72-cavity molds alone are delivered in 1 to 2 weeks, with a single-week delivery program available for 48/72/96-cavity configurations. Custom non-standard applications — including special neck finishes, unique bottle designs, or mixed-cavity configurations — are delivered in 5 to 7 weeks. To support these timelines, DKM maintains safety stock for PET preform injection molding machines in the 350T, 450T, 550T, and 650T classes, alongside auxiliary equipment.

Every line undergoes a pre-factory acceptance test under simulated production conditions before shipment, and PET preform molds carry a 3-year warranty with free spare parts during the warranty period.

Field Performance and Documented Cases

These specifications are reflected in field deployments. One large-scale water and beverage packaging producer operates two 144-cavity PET preform production lines — one in Iraq and one in Iran — both running under normal production conditions, with customer acceptance test reports confirming satisfactory performance and full payment settled for both projects. In another documented case, a 72-cavity production line with an out-mold cooling system produces a 13.5g, 28mm neck preform at a 12-second cycle time, and standard 48/72/96-cavity lines were made available with 14-day delivery for 28/38mm neck finishes.

A Coordinated Approach to PET Preform Manufacturing

Taken together, the DKM PET preform machine lineup reflects a broader strategic positioning: DKM Machinery and SINO MOULD describe themselves as a technology-driven enterprise integrating R&D and manufacturing across injection molding machines, precision molds, robotics, and complete turnkey production lines. For PET preform production specifically, this means the machine, mold, and robot are matched by design — DKM-PET III tonnage to SINO MOULD cavity count to Out-Mold Cooling & Pick Robot configuration — rather than assembled from disparate suppliers after the fact. For producers comparing injection speed, repeatability, mold tolerance, and delivery windows side by side, the documented cycle times, the ≤0.5‰ injection repeat accuracy, and the 14-day standard line delivery together form a verifiable basis for evaluation rather than a general claim of capability.

A12b7ecda17eedd5f0bf7361fc90d5f3

https://dkm.com/pet-preform-molding-machine/
DKM Machinery