Uncategorized

Why Opaque Metallized Film Can Still Have Pinholes

Appearance averages over a much larger area

A thin metallized layer can look uniformly opaque while containing small discontinuities. Oxygen or water vapor may permeate more readily where the metallic layer is interrupted. The polymer layers beneath may still be continuous, so a gap in the coating and a hole through the laminate describe different defects.

Use appearance and transmission checks together

Suppose two film lots look alike by reflected light, but one has higher oxygen transmission. Inspection under transmitted light can help locate some discontinuities when the rest of the structure permits it. Compare representative specimens at the same conditions, and check whether the defects are isolated or concentrated around a fold or handling path.

Use transmission testing to quantify the barrier effect. A visible pinhole count alone cannot establish the flow through the film or the finished package.

A2dad28f8bdd5be5b2b4a795e14b7e66

Packaging sample showroom of SamBound New Material Technology Company Ltd. (sambound.com).

sambound.com
SamBound New Material Technology Company Ltd.